When the 5083 aluminum plate is dyed, there may be light color or color difference. What is the reason for that?What can be done about it?Next 5083 aluminum plate manufacturers to introduce to you.

1. The oxide film thickness of 5083 aluminum plate is uneven.The possible reason is that the temperature and concentration of the anodic oxidation tank solution are not uniform, so the compressed air stirring tank solution is used to solve this problem.

2. The temperature or concentration distribution of the dye solution is uneven.The mixing technology can be introduced to increase the mixing times.

3. Excessive development of dyeing processing speed.5083 aluminum plate workpiece through the bottom first into the dye solution and leave the dye solution, so the bottom is easy to dye deep.The solution is to adjust dilute dyes, appropriate extension of dyeing time.

4. Bad conductive network.It may be caused by loosening of the hanger. Attention to the hanger can avoid such research problems.

5, too dilute dyes, dyes can be added to improve the concentration.

6. The temperature of dye solution should not be too low.The dye solution can be heated to below 60℃.

7. When the dye dissolves improperly or the insoluble dye floats, 5083 aluminum plate is easy to produce color difference.The solution is to improve our dye solution.

The above is not only about the causes and solutions of 5083 aluminum plate light color or color difference, want to know more about the price of 5083 aluminum plate friends can contact us.