The 2A12 aluminum plate may need to be cut when it is used, so attention should be paid to the edge when it is cut. Next, the manufacturer of 2A12 aluminum plate will introduce to you the edge treatment standard of 2A12 aluminum plate.

Neat formation: the quality of 2 a12 aluminum material has the certain requirement, should be on the edge when cutting parts processing, to ensure that at least 2 a12 aluminum plate edge shear is very neat and smooth, to ensure the accuracy of the material size both high enough, and ensure that the edge effect is good, avoid the effect of construction due to the edge of the error in the process of use.

No crimping: Generally speaking, the processed edges of 2A12 aluminum plate should be ensured without crimping during cutting. The edges should be well processed to present a very good use effect.

Smooth not sharp: The edges of the aluminum plate while getting the 2A12 treatment, while neat, should be smooth enough, and not very sharp, in order to contact with the human body to avoid when the aluminum plate 2A12 scratch the edge.

The above is the edge treatment standard of 2A12 aluminum plate. If you need 2A12 aluminum plate, please contact us.