6082 aluminum plate in use, I do not know if you have found, sometimes the surface will adhere to oil, in fact, this oil is produced in the production, the next 6082 aluminum plate manufacturer will introduce to you,6082 aluminum plate surface oil pollution causes and solutions.

After the rolling of 6082 aluminum plate, there is too much oil on the surface of aluminum tip, and the residual oil besides the rolled oil film is also attached. These visible oil can be found on the surface during the inspection and cutting of products in the later stage.

These smears on the surface of the 6082 aluminum plate will cause a lot of damage to the surface of the aluminum coil.Due to the relatively thin thickness of one side of the aluminum plate 6082, in subsequent annealing, simple bubble formation, and excessive appearance, because it will form in the 6082 aluminum appearance of multiple oil residues, will lead to not very good performance posts.Another important aspect, as long as the appearance of 6082 aluminum plate is not clean enough, it can be used as a decoration and packaging design materials to meet the aesthetic requirements, or it is difficult to sell out by themselves.

Oil stains on the surface of 6082 aluminum plate need to be cleaned.If there is oil that cannot be cleaned, the product will be scrapped directly.If there is oil, it will be more difficult to control the quality of subsequent products if they enter the market or enter the warehouse, but there are also many after-sale problems emerging one after another.Chemical flushing is recommended.

The above is about the cause of oil pollution on the surface of 6082 aluminum plate and the solution. If you need 6082 aluminum plate, please consult us.