5052 aluminum tube because of good performance in many industries have been widely used, that we in the purchase of 5052 aluminum tube, sometimes need to polish it, the next 5052 aluminum tube manufacturers to introduce to you, the chemical polishing of 5052 aluminum tube.

5052 aluminum polishing is the solution chosen for multiple USES in solutions containing phosphoric acid, and most of the time, a combination of solutions using nitric acid and sulfuric acid.Combined in this way, the effective dose can be adjusted.However, the solution is mixed in use to achieve the required temperature of about 105 degrees, at which point this results in the oxidation of nitrogen substances that can pollute the environment.Therefore, when using mixed solutions, appropriate additives should be added.

S acid brighteners are now commonly used.When polishing, it will not pollute the environment. This additive is only suitable for polishing pure aluminum or 5-series aluminum tubes.If it contains other elements, the effect is much worse.Therefore, the polishing process, and such additives cannot be used in a wide range, but currently there is no place to produce a better additive, so only this way of polluting polishing aluminum 5052 chemical polishing is still used.However, when polishing, to determine the dosage, otherwise it is very easy to 5052 aluminum tube surface quality caused serious corrosion.

The chemical polishing of 5052 aluminum tube is introduced here, if you need 5052 aluminum tube, you can consult us.