Many devices can use aluminum alloy material, walk all is no exception, all go is a kind of numerical control lathe, is a precision machining equipment, mainly used for precision hardware and axial profiled batch processing, it can be used in a 7075 aluminum rod materials, then 7075 aluminum rods manufacturer to introduce to you, 7075 aluminium rods in the application of the all equipment.

The 7075 aluminum bar is more suitable for the purpose of processing, mainly because it is a kind of aluminum alloy with zinc as the main element, but sometimes a small amount of magnesium and copper are added.Superhard aluminum alloys contain zinc, lead, magnesium and copper alloys that are close to the hardness of steel and can be heat treated and strengthened.It is a high strength, heat resistant alloy with common corrosion resistance and good mechanical properties.7075 aluminum bar is a high strength cold worked forged alloy, far superior to low carbon steel.The 7075 aluminum bar is one of the most powerful commercial alloys.It has general anti-corrosion properties, good mechanical properties and anodic reaction.Fine grains give better drilling performance for deep holes, increase the wear resistance of the tool, and make greater difference between thread rolling and heavy cutting.

7075 aluminum bars have been used in the aircraft design and manufacturing technology industry since the late 1940s, and are still widely studied in the aviation industry.It is characterized by: solubilization treatment, is particularly effective thermal strengthening, high strength under 150℃, especially after low temperature strength good plasticity.Poor welding performance;The tendency of stress corrosion cracking;Protective use shall be covered with aluminum.Two-stage aging system can improve the resistance to stress corrosion cracking of the alloy.

The above is about the application of 7075 aluminum bar in the calculating machine. If you need 7075 aluminum bar, please consult us.