2024 aluminum plate is often used by enterprises in the form of thick plate, but have you found that 2024 aluminum plate in the form of thick plate will appear brittle, then what is the reason for this?Next, 2024 aluminum plate manufacturers to give you an analysis.

Of 2024 aluminum plate thick aluminum plate brittle may be out of die pressure, die pressure size is directly affected by the mold of the compression ratio, due to shunt bar 2024 aluminum plate, which is usually caused by poor convergence performance, should be appropriately increased muscle and outside surface, reinforcement and reinforced the confluence of the length, or increase the compression ratios, the change of the die head pressure can be adjusted by changing the die head straight length material flow resistance.

In the mold design stage, different compression ratios can be selected to change the extrusion pressure, but it must be noted that the compression ratio of the aluminum plate mold should adapt to the compression ratio of the extruder screw, and the extrusion process parameters can be adjusted by changing the formula.The cooling rate and cooling water temperature of the mold often do not attract enough attention. The function of the cooling water is to make the 2024 aluminum plate cool in time on the macromolecular chain of the extension of the thick aluminum plate, so as to achieve the purpose of use. The uneven material of the oral mold leads to the inconsistent thickness of the thick aluminum plate wall, or the inconsistent compaction.

2024 aluminum  plate in the thick plate will appear brittle reasons introduced here, the need for 2024 aluminum plate can contact us.