2A12 aluminum plate needs to be cut when it is in use, and the commonly used cutting method is sawing. 2A12 aluminum plate manufacturers will introduce to you the operating points of 2A12 aluminum plate sawing. I hope it will be helpful to you.

The cut 2A12 aluminum plate must be clamped firmly.When sawing 2A12 aluminum plate, the blade should not move too fast, and the temperature of 2A12 aluminum plate should not be too high.Lubricant pouring position should be correct and continuous.

When the saw blade has not completely stopped rotating, the aluminum chip cannot be cleaned until it has completely stopped rotating.The short end of 2A12 aluminum plate shall not be less than 20mm. It shall not be removed until sawing is stopped.

When the saw blade returns to its original position, the continuous 2A12 aluminum plate shall be strictly prevented from impacting the saw blade.Operators hands should not be placed under the 2A12 aluminum plate.

The operating points of 2A12 aluminum plate sawing are introduced here. For consultation on the price of 2A12 aluminum plate, you can contact Jiangsu Bo Ruitong Aluminum Industry.