Why is 6063 aluminum plate suitable for building materials? We may have this doubt. Then the 6063 aluminum plate manufacturers will reveal this doubt to you.

The amount of Mg2Si in 6063 aluminum profiles is controlled within the range of 0.75% ~ 0.80%, which can meet the requirements of engineering mechanical system performance.Under the condition of normal extrusion coefficient (greater than or equal to 30), the tensile strength of the profiles is in the range of 200 ~ 240 MPa.This can control the study of the alloy, not only learning the material to have good plasticity, easy to extrude, high corrosion resistance and surface information processing performance, but also can save alloy elements.However, the impurity Fe should be strictly controlled.If the Fe content is too high, the extrusion pressure will increase, the quality of the extruded material surface will deteriorate, the anodic oxidation chromatic aberration will increase, the color will be gray and dull, Fe will also reduce the plasticity and corrosion resistance of the alloy.Practice has proved that it is ideal to control the iron content within the range of 0.15% ~ 0.25%.

6063 aluminum plate has excellent thermoplasticity, quenching treatment temperature range is wide, quenching sensitivity is low, after extrusion and forging demoulding, as long as the temperature through significantly higher than the quenching temperature.It can be quenched by spraying or perforating water.Thin-walled parts (6 < 3mm) can also be air quenched.Good solderability and corrosion resistance, smooth surface without pressure machining, and easy to anodic oxidation and coloring.It is more suitable for use in building materials.

Why 6063 aluminum plate is suitable for building materials is mentioned here, want to consult the price of 6063 aluminum plate can contact us.