We all know that 2024 aluminum plate is not magnetic, can not be magnetized by the magnetic splitter, so generally through the means of splitter.Next small make up to introduce you, 2024 aluminum plate method.

1. Separate air knife

At present, air knife splitting is a common method for 2024 aluminum plate segmentation.The compressed air is then poured into the air knife at high pressure, blowing from the edge of the sheet, and then the sheet will be blown away in a semi-strong airflow.The air compression degree is higher and higher, 2024 aluminum plate blowing force is greater.In order to save cost, each air knife is equipped with an electric switch specially controlled by an enterprise.In this case, at the beginning of each air knife, the enclosed space is well controlled.

The more common air knife is a round and long air knife.The working range is large is the strip air knife, but its energy consumption is large, the air into the decompression degree is also large, suitable for use on a 2024 aluminum plate is not easy to peel..The smaller work area is the round air knife, the air into it out of focus, and the degree of pressure drop is small, the degree of energy consumption is also small.

Due to 2024 aluminum plate plate requirements of medium viscosity is higher, in addition to the general cleaning machine also need to be configured with an oil machine.Oil coating and thickness range are well controlled.

2. Mechanical partitioning

Air knife splitting can produce large energy losses and requires independent high-pressure systems, so equipment investment is high, but in recent years the sawtooth splitter has been available.The top layer of 2024 aluminum plate and the palletizing material are separated by the serrated cutter.Its effect is compared with gas knife, saw edge splitter efficiency is higher, and less energy consumption, 2024 aluminum plate can be used, but for less hardness aluminum alloy material also need to be equipped with line cleaning machine.

3. Terminal pickup is used for sorting

In real life, the use of 2024 aluminum plate is very little, so the car factory in the use of 2024 aluminum plate would directly buy 2024 aluminum plate, sheet but came back from the purchase to the paving use time is very long, plate between the pressure, so the air is squeezing out slowly, between plate formed between the end plate close to the condition of vacuum, adsorption capacity is very large.At the same time, the aluminum plate 2024 due to the lubricating oil between the prolonged placement, so as to reduce the lubrication viscosity, but also increased the attractiveness of the sheet.The working principle of the end pickup: after the plate is absorbed, the suction cup is used to firmly press the plate, so that the cylinder can be quickly promoted, and the suction cups around it can suck up the plate, so that the plate can be separated.

About 2024 aluminum plate method is introduced here, if interested in 2024 aluminum plate friends, you can contact us.