5052 aluminum plate is good anti-rust anti-corrosion materials, corrosion resistance, good weldability, cold workability are widely used in aircraft and automobile oil tank, oil pipe, as well as the sheet metal of transportation vehicles, ships, etc., how do you know not to know that 5052 aluminum plate is burn injection forming, the next 5052 aluminum manufacturer detailed introduce to everyone.

To prepare the crucible and smelting technology tools, the crucible material cast 5052 aluminum plate as the common iron crucible, but also cast steel and steel plate can be used for welding crucible.Before use, the new crucible and the old ones that have not been used for a long time should be hit and heated to 700-800 degrees for 2-4 hours to burn off the inner wall of the water and combustible material adhered to the crucible. After being cooled to 300 degrees, the wall of the crucible should be carefully cleaned and painted at a temperature not less than 200 degrees.Preheat the crucible to 500-600 degrees before use, and keep the temperature for more than 2 hours. It is best to melt a furnace with the same grade of recharging before melting.

Shovel melting tools need to bear, pressure, stirring spoon, ladle, mold, etc., should be preheated before use, and coated in 150 ℃ temperature protection coating - 200 degrees, in a fully dry, 200-400 ° ~ drying drying temperature, for 2 hours or more time, should be attached to the oxide in use, the surface of the fluoride (blow molding) optimization after completely removed.

The above is a brief introduction of how 5052 aluminum plate is sintered and formed. If you need 5052 aluminum plate, please contact us.