5083 aluminum plate is often used for Marine aluminum plate, that in the use of the ship, may need to be folded edge welding and other processes, then 5083 aluminum plate manufacturers will give you a brief introduction, 5083 aluminum plate folding and welding process.

Folding process of 5083 aluminum plate:

1. Power switch and no-load operation of 5083 aluminum plate folding machine shall be checked before using the folding machine.

2, the mold must be professionally installed and installed, in the installation process to reduce the mold head clearance adjustment, by making the waste to be washed again.

3. Before folding plate, check the logo of 5083 aluminum plate and make sure the processing drawing is correct before formally starting processing. Pay attention to environmental protection of decorative surface of 5083 aluminum plate when folding plate.

4. After the folding of 5083 aluminum plate, timely check whether there are cracks in the outer arc of the folding that affect the use of the enterprise due to problems.

Welding process of 5083 aluminum plate:

1. 5083 aluminum plate welding adopts the welder, and the power switch needs to be checked before use, and the equipment runs without load.

2. Welding of 5083 aluminum plate shall be performed by skilled workers with welding license.

3. Check the welding and control identification drawing of 5083 aluminum plate. If the welding is started correctly to protect the decorative surface of the aluminum plate, it shall be performed before being processed according to the requirements of the designer of the necessary welding part.

The above is about 5083 aluminum plate folding and welding process introduction, when using 5083 aluminum plate in the ship must be standardized operation, if you also want to know the price of 5083 aluminum plate, please contact us.