6082 aluminum plate in the use of the general need to be reprocessed, sometimes will be cut or punched processing, that in these processing may appear some problems, today 6082 aluminum plate manufacturers to introduce to you, 6082 aluminum plate cutting drilling problems when the solution.

I. Time of occurrence of defects

To determine whether the problem occurred during or after the puncture, if it occurred during the puncture, adjust the power and pressure of the standard puncture according to the actual situation at the beginning or during the conversion of puncture standards.If the flush has problems before the end of the year, this is because you need to increase the drilling time before switching to standard cutting.

If the cutting begins to occur, it is because the surface metal material members in the 6082 aluminum plate hole cannot pass through, so a pulse technical standard or low speed standard shall be set at the starting point of use.

Second, the location of the defect

If in the special part of the processing equipment, 6082 aluminum plate perforation problem appears together, it is due to the main shaft and nozzle center offset.This requires adjustment for optical path deviations.

If too much of the aggregate or perforated portion is punctured around the cutting path, it can also cause defective perforation due to high temperature machining sites.

3. Abnormal time of drilling

With the passage of processing working time in China, the abnormal occurrence of 6082 aluminum plate processing enterprises increases with different frequencies but does not decrease. The power caused by vibration generator failure may be changed.If the cooling time can be restored, it may be due to the effect of the optical element heat mirror.In this case, we need to repair the optical parts and keep in touch with the manufacturers.

Four, the occurrence of drilling abnormal raw materials

For 6082 aluminum plate with abnormal punching, it is important to determine whether it has been well processed in the past.With processing records, there is no need to adjust the production and processing technical standards. It may be a problem of enterprise equipment and optical components, which needs to be further identified.

The above is the solution to the problem of 6082 aluminum plate cutting and drilling. If you need 6082 aluminum plate, please contact us.