5083 aluminum tube its performance is better, can be bent processing, that for thin wall 5083 aluminum tube small radius bending what steps?Next 5083 aluminum tube manufacturers to give you a detailed introduction, 5083 aluminum tube bending specific steps.

1. Separate the pressure guide block and clamping block from the bending mold plate;

2. Apply rapeseed oil evenly on the surface of 5083 aluminum tube as lubricant;

3. After the completion of the second step, 5083 aluminum tube head is sent into the tube with 5083 aluminum tube, reaching the position 12.5 ~ 25mm away from the joint of pressure guide block and clamping block.The distance of the mandrel is controlled on the numerical control panel of the external pipe bender.

4. Then insert the 5083 aluminum tube to the specified position, reset the pressure guide block and clamping block, and press the tube on the bending mold plate with the pressure guide block and clamping block;

5. The pipe mold rotates, and the pipe follows the bending;

6. Loosen the fixture to pull the 5083 aluminum pipe out of the pipe;Finish with an elbow.

The above is about 5083 aluminum tube bending specific steps, if you want to know the price of 5083 aluminum tube can consult us.