After the 6061 aluminum bar is produced, there will be a layer of grease on the surface, so it needs degreasing treatment at this time. Next, the 6061 aluminum bar manufacturer will introduce to you the degreasing treatment method of 6061 aluminum bar.

6061 aluminum bar surface information processing with absorbent cotton wet solvent can be timely wipe, remove the grease, and then wipe with a clean cotton cloth for several times.

After surface treatment and degrease, 6061 aluminum bar is chemically treated in the following solution: concentrated sulfuric acid 27.3 potassium dichromate 7.5 water 65.2;After soaking at 10-30 ° for 60-65min, remove and rinse, dry or below 80°;Or wash and dry in the following solution: 10 butanol phosphoric acid 3 water 20, this method is suitable for phenolic nylon glue, the effect is good.

6061 aluminum bar material surface information processing after partial degrease was used standard solution, and then after fully washing and drying treatment of epoxy and epoxy with high bonding strength, bonding method within 4h - butadiene rubber bonding.

The degreasing method of 6061 aluminum bar is introduced here. If you need to consult the price of 6061 aluminum bar, you can consult us.