2A12 aluminum plate may crack in the production process, at this time the impact on 2A12 aluminum plate is large, so we need to find a way to avoid the surface crack of 2A12 aluminum plate, then 2A12 aluminum plate manufacturers to give you advice.

First of all, it is suggested that 2A12 aluminum plate can be produced on a small machine, and appropriate production technology and requirements should be adopted.

Secondly, the production speed of the front end and the back end should be slowed down in the production of 2A12 aluminum plate, because the front end and the back end are dead zone, with many impurities, poor quality and insufficient viscosity, so the speed should be slowed down.

In addition, the production speed of 2A12 aluminum plate should be adjusted steadily, and the pressure should not be high or low. Manual operation should be cooperated when shifting gears.

Moreover, the production surface of 2A12 aluminum plate should be fine and clean without oil pollution, the internal organization should meet the standard, and there should be processing allowance.

The method to avoid the surface crack of 2A12 aluminum plate is introduced here. If you want to know the price of 2A12 aluminum plate, you can call to contact us.