5083 aluminum plate because of its hardness and strength are general, so there may be deformation in the use of processing, then if 5083 aluminum plate deformation is there any way to solve it?Next 5083 aluminum plate manufacturers to give you advice.

1, mechanical correction

The common correction equipment for 5083 aluminum profiles and thick plates over 8mm is the press.Generally speaking, the thicker the 5083 aluminum plate, the easier it is to straighten, and the thinner the 5083 aluminum plate, the more difficult it is to correct.Corrections using a press are generally for zigzag deformation in a single direction.General correction before the bottom of the 5083 aluminum plate pad pressing plate, to prevent 5083 aluminum plate surface bruise.

2, workmanship correction

Some small deformations can be corrected by process.5083 aluminum plate in the choice of technical correction should be careful, technical correction to consider the appropriate hitting tools, we also need to consider in different parts of the force and pad, pressure parts with rubber pad, wood or wood blocks, to ensure that the surface of 5083 aluminum plate in the correction of damage.

3, flame correction

Flame correction method is the key is to grasp the correct 5083 aluminum sheet metal material properties and heat treatment technology, the need to pay attention to the hot working temperature differences and control technique, differences in response to three common flame correction of heating way: linear heating method, dot heating, heating method, triangle according to the specific situation to choose a reasonable correction method.

The solution to the deformation of 5083 aluminum plate is here. If you need 5083 aluminum plate, you can contact us.