2024 aluminum plate in the oxidation of the use of the fixture, we do not underestimate the role of the fixture, the use of the fixture has a certain impact on 2024 aluminum plate, next 2024 aluminum plate manufacturers to introduce to you, the use of the fixture on 2024 aluminum plate.

First of all, we should clean the surface of the fixture when we use it, because the fixture will also cause oxidation film in the whole process of anodic oxidation.Therefore, the applied fixture must be removed before the redevelopment of application research.The stripping can be done in an aqueous solution of aluminum and oil.It is also possible to file away the oxide film at the contact position between the jig and 2024 aluminum plate workpiece with a filing knife. This method can also extend the service life of the jig for some jig.

Clamping site selection, clamping workpiece site to choose an appropriate, generally should be clamped in two workpiece side (that is, non-decorative engineering design position).Otherwise, the contact position of 2024 aluminum plate deep processing workpiece and the fixture is covered by the fixture and cannot be converted into oxidation film, which naturally cannot be contaminated with the color, which will show a significant milky black spot, which will harm the appearance quality.

Avoid workpiece clamping deformation, fixture different hanging tools, clamp has a certain degree of ductility.When clamping deformed workpiece, special attention should be paid to prevent the workpiece deformation caused by excessive force.

Avoid clamping too loose, when the workpiece clamping is too loose, the electrical flow between the fixture and 2024 aluminum workpiece will be on and off, under such a thing will damage the workpiece.

The above is about the impact of the use of fixtures on 2024 aluminum plate, if you need 2024 aluminum plate, please contact us.