We all know that 5052 aluminum plate is the common raw material of anti-skid pattern aluminum plate, so what are the standards when we choose and buy anti-skid pattern 5052 aluminum plate?Next 5052 aluminum plate manufacturers to introduce to you.

Generally speaking, the thickness of 5052 aluminum plate should be more than 1.2 mm, 5052 aluminum plate should have good toughness, tensile strength of 5052 aluminum plate to reach 160 Newton/mm 2.If the tensile strength of 5052 aluminum plate is less than 100 Newtons/mm 2, the thickness of the oxide film is less than 10 microns, then this 5052 aluminum plate may not be qualified, it is not recommended to buy.

We also need to look at 5052 aluminum products for work, the quality of work may not be easy to see, but the surface of 5052 aluminum plate to be very detailed at least.The 5052 aluminum plate product shall be easy to install and can be fully sealed when connected without any gap.

From the view of the cutting edge of 5052 aluminum plate, the products with poor quality of 5052 aluminum plate usually adopt the cutting method of saw, and the cutting edge is not very smooth.Brands of aluminum usually use milling.

Have again is the price of 5052 aluminium plate product, but need not care too much about the price when buying 5052 aluminium plate, because the price of 5052 aluminium plate with good quality is higher.It costs more to produce high-quality 5052 aluminum plates.

The above is about the purchase of anti-skid pattern 5052 aluminum plate when the introduction of what standards, if you need to consult 5052 aluminum plate price can contact us.