5052 aluminum tube is usually produced by extrusion, but what is the specific process?I believe that we are not very clear, that today 5052 aluminum tube manufacturers to introduce to you, 5052 aluminum tube extrusion operation process.

1. Open the filling valve and the tank filter valve.

2. Anti-wear hydraulic oil in the oil tank shall be sufficient.

3. Keep the oil temperature within the normal range, no more than 55 degrees Celsius.

4. Supply water to the cooler.

5. Keep the voltage within the floating range of plus or minus 380 within 10%.

6. Keep each guide rail lubricated well.

7. Keep contact surfaces clean.

8. Open the valve on the control oil system.

9. Lower the high pressure valve knobs.

10, the amount of hydraulic oil into the high pressure pump and low pressure pump.

11, check the student once the bolt, mainly through the high pressure part.

5052 aluminum tube extrusion process is introduced here, if you need to understand the price of 5052 aluminum tube can consult us.